Acclaim-lighting XB-R1 Setup tool Manuale Utente Scaricare il pdf (Pagina 13)

User’s Manual

(2) 512 Channel Mode:

If you set the Mode as “512 Channel Mode”, the LCD-display will immediately show you as below:

Note:

In 512 Mode, user can rotate the multi-selector clockwise or anticlockwise to change the

cursor and channel numbers. And LCD can only show up to 15 channels each time.

(3) Auto Chase Mode:

If you set the Mode as “Auto Chase Mode”, the LCD-display will immediately show you as below:

① To set the Chase Start Channel.

② To set the Chase End Channel.

③ To confirm your set and enter the Auto Chase Mode.

*User can set the chase start/end channel by rotating the multi-selector, and select the above “Confirm”

item and press the multi-selector, LCD will show you like this:

① To confirm DMX sequential channels numbers(1~48) when chasing the intensity output.

② DMX channels is increased by changing jumps(1~48) when chasing. And channel output is

beginning from the DMX start channel.

③ To set up fade time for step(1~200).

④ To adjust the intensity(0~255).

4.4 LCD Backlight

Rotate the multi-selector and select the “LCD Backlight” function mode, then press the multi-selector,

LCD will show you like this:

←①

←②

←③

←④

←①

←②

←③

< Setup No Answer >

Setup With Answer >

DMX Controller >

LCD Backlight:xxxx >

> DMX Mode Select

Single Channel >

512 Channel >

Auto Chase >

> Channel:[XXX-XXX]

000 000 000 000 000

> DMX Mode Select

Single Channel >

512 Channel >

Auto Chase >

> Chase Active Setup

Start Channel:

XXX >

End Channel:

XXX >

Confirm >

> Group of LEDs:XX >

Jumps:

XX >

Step /50mS:

XXX >

Intensity: XXX >

1 2 ... 8 9 10 11 12 13 14

Commenti su questo manuale

Nessun commento

Acclaim-lighting XB-R1 Setup tool Manuale Utente Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Relé Acclaim-lighting XB-R1 Setup tool